Custom Modern Natural Oak Grain Melamine Interior Door with Simple Geometric Cut, Wall Panel Integrated for Residential Use - XUANMU A301
Details
SUPERUS coordinates custom doors, wall panels and cabinetry within one spatial language.
Product combinations, finishes, dimensions and functional requirements are confirmed according to each project.
Key Features:
A warm brown walnut straight grain running finely across the leaf, the tone warm and substantial. A slim vertical groove is set into the left, and below it a horizontal line lengthens the proportions. A matte-black split lever sits to one side, set against the warm grain. The look is modern minimalism with a touch of natural wood warmth.
On a wood-composite core, melamine resin-impregnated paper is thermoset in one high-temperature, high-pressure cycle, permanently bonded and fully paint-free. The face is hard and dense, resisting scratches, heat, stains and fingerprints, wiping clean on a damp cloth. Grain reproduces naturally, matched across batches. It will not peel, lift, warp or crack, and is E1-compliant, low formaldehyde, low VOC, ready to live in once fitted.
In a living room or study it settles into the background; as light rests on the warm grain the room feels warm and tactile. Care is a damp-cloth wipe, keeping sharp objects off. It pairs with cream walls, soft leather and brushed metal.
Frequently Asked Questions
What is the difference between solid wood, engineered wood and WPC interior doors?
Solid wood doors use natural timber (oak, ash, walnut) and give the richest grain, but they move most with humidity. Engineered doors bond a stable core (LVL, finger-joint or solid-core board) with veneer or laminate, so they resist warping far better. WPC (wood-plastic composite) is fully waterproof, termite-proof and needs almost no maintenance, which is why it now dominates bathrooms, kitchens and tropical projects.
Do solid wood doors warp or swell in humid tropical climates?
Any timber absorbs moisture, so a door can cup, swell or bind when indoor relative humidity swings. The risk is controlled three ways: kiln-drying to 8–12% moisture content, balanced construction (equal veneer or laminate on both faces, engineered core), and complete six-sided sealing. For coastal and tropical projects we recommend engineered or WPC cores, or solid wood with full edge sealing and a stable 40–60% indoor RH.
What is a solid core door, and is it worth the extra cost?
A solid core door replaces the hollow honeycomb cavity with a dense engineered core, so it weighs far more, blocks noticeably more sound, resists dents and closes with a substantial feel. For bedrooms, bathrooms and home offices the upgrade usually pays back in comfort and resale appeal. For closets, pantries and low-traffic storage, a hollow core remains a sensible saving.
Hollow core or solid core: which should I choose for a bedroom?
Choose solid core. A hollow core door is light and cheap but transmits conversation almost unchanged, while a solid core door typically adds meaningful sound reduction and privacy. If the room is a nursery, home office or shares a wall with a living area, solid core plus a perimeter seal and a drop-down door bottom is the standard recommendation.
Facebook
Twitter
LinkedIn
