Custom Off White Melamine Interior Door, Wall Panel Integrated for Residential Use - MF-2002A
Details
SUPERUS coordinates custom doors, wall panels and cabinetry within one spatial language.
Product combinations, finishes, dimensions and functional requirements are confirmed according to each project.
Key Features:
A clean milky-white ground, matte with no wood grain. The panel splits into two recessed zones, a long rounded rectangular moulding above and a smaller block below, like wall panelling gathered into one door. A matte-black split lever sits to one side, understated. The feel is modern minimalism with a touch of French elegance.
On a wood-composite core, melamine resin-impregnated paper is thermoset in one high-temperature, high-pressure cycle, permanently bonded and fully paint-free. The face is hard and dense, resisting scratches, heat, stains and fingerprints, wiping clean on a damp cloth. The tone stays even across batches. It will not peel, lift, warp or crack, and is E1-compliant, low formaldehyde, low VOC, ready to live in once fitted.
In a bedroom, walk-in wardrobe or study it makes a quiet, well-mannered backdrop; as daylight drifts across the moulding the room feels bright and gentle, framing rest and reading. Care is a damp-cloth wipe, keeping sharp objects off. It suits pale timber, linen and soft grey schemes with ease.
Frequently Asked Questions
What is the difference between solid wood, engineered wood and WPC interior doors?
Solid wood doors use natural timber (oak, ash, walnut) and give the richest grain, but they move most with humidity. Engineered doors bond a stable core (LVL, finger-joint or solid-core board) with veneer or laminate, so they resist warping far better. WPC (wood-plastic composite) is fully waterproof, termite-proof and needs almost no maintenance, which is why it now dominates bathrooms, kitchens and tropical projects.
Do solid wood doors warp or swell in humid tropical climates?
Any timber absorbs moisture, so a door can cup, swell or bind when indoor relative humidity swings. The risk is controlled three ways: kiln-drying to 8–12% moisture content, balanced construction (equal veneer or laminate on both faces, engineered core), and complete six-sided sealing. For coastal and tropical projects we recommend engineered or WPC cores, or solid wood with full edge sealing and a stable 40–60% indoor RH.
What is a solid core door, and is it worth the extra cost?
A solid core door replaces the hollow honeycomb cavity with a dense engineered core, so it weighs far more, blocks noticeably more sound, resists dents and closes with a substantial feel. For bedrooms, bathrooms and home offices the upgrade usually pays back in comfort and resale appeal. For closets, pantries and low-traffic storage, a hollow core remains a sensible saving.
Hollow core or solid core: which should I choose for a bedroom?
Choose solid core. A hollow core door is light and cheap but transmits conversation almost unchanged, while a solid core door typically adds meaningful sound reduction and privacy. If the room is a nursery, home office or shares a wall with a living area, solid core plus a perimeter seal and a drop-down door bottom is the standard recommendation.
Facebook
Twitter
LinkedIn
