Dettagli

 

SUPERUS coordina porte personalizzate, pannelli a parete e armadi in una lingua spaziale.
Combinazioni, finiture, dimensioni e requisiti funzionali sono confermati in base a ogni progetto.

Caratteristiche principali:

Un terreno morbido di avorio-latte, opaco senza grano di legno. Attraverso la parte superiore si esegue un'alta formatura arrotondata-corno incassato che arriva da vicino al bordo superiore al pannello medio-basso, i suoi angoli morbidamente alleviati, come pannelli a parete in una porta. Una leva divisa opaca-nero siede a un lato, sottostated. Il look è minimalismo moderno con un tocco di eleganza francese.
Su un nucleo di legno-composito, la carta impregnata in resina melamina è termoincastonata in un ciclo ad alta temperatura, ad alta pressione, saldata in modo permanente e completamente priva di vernice. Il viso è duro e denso, resiste a graffi, calore, macchie e impronte digitali, pulisce su un panno umido. Il tono rimane anche attraverso i lotti. Non sbuccierà, solleva, curvatura o crepa, ed è E1-compliant, bassa formaldeide, basso VOC, pronto a vivere una volta montato.
In una camera da letto o cabina armadio si fa uno sfondo tranquillo; mentre la luce del giorno passa attraverso lo stampaggio arrotondato la stanza si sente calda e aperta. La cura è una tergicristalli umidi, mantenendo gli oggetti affilati. Si adatta a legname pallido, tessuti molli e camere color crema.

Supporto del prodotto

Domande frequenti

What is the difference between solid wood, engineered wood and WPC interior doors?

Solid wood doors use natural timber (oak, ash, walnut) and give the richest grain, but they move most with humidity. Engineered doors bond a stable core (LVL, finger-joint or solid-core board) with veneer or laminate, so they resist warping far better. WPC (wood-plastic composite) is fully waterproof, termite-proof and needs almost no maintenance, which is why it now dominates bathrooms, kitchens and tropical projects.

Do solid wood doors warp or swell in humid tropical climates?

Any timber absorbs moisture, so a door can cup, swell or bind when indoor relative humidity swings. The risk is controlled three ways: kiln-drying to 8–12% moisture content, balanced construction (equal veneer or laminate on both faces, engineered core), and complete six-sided sealing. For coastal and tropical projects we recommend engineered or WPC cores, or solid wood with full edge sealing and a stable 40–60% indoor RH.

What is a solid core door, and is it worth the extra cost?

A solid core door replaces the hollow honeycomb cavity with a dense engineered core, so it weighs far more, blocks noticeably more sound, resists dents and closes with a substantial feel. For bedrooms, bathrooms and home offices the upgrade usually pays back in comfort and resale appeal. For closets, pantries and low-traffic storage, a hollow core remains a sensible saving.

Hollow core or solid core: which should I choose for a bedroom?

Choose solid core. A hollow core door is light and cheap but transmits conversation almost unchanged, while a solid core door typically adds meaningful sound reduction and privacy. If the room is a nursery, home office or shares a wall with a living area, solid core plus a perimeter seal and a drop-down door bottom is the standard recommendation.